| NEIGHBOR | : | アドレス値 | ||||||
|
非特権EXECモード、特権EXECモード
BGPネイバーの情報を表示する。
NEIGHBORパラメーターを指定した場合、指定したBGPネイバーの情報のみを表示する。
show ip bgp neighborsとshow ipv6 bgp neighborsは同等の出力となる。
スタック有効時は実行できない。
SWX3220#show ipv6 bgp neighbors
BGP neighbor is 100::100, remote AS 65000, local AS 65000, internal link
BGP version 4, remote router ID 192.168.100.250
BGP state = Established, up for 00:00:16
Last read 00:00:16, hold time is 90, keepalive interval is 30 seconds
Neighbor capabilities:
Route refresh: advertised and received (old and new)
4-Octet ASN Capability: advertised and received
Address family IPv4 Unicast: advertised and received
Received 3 messages, 0 notifications, 0 in queue
Sent 2 messages, 0 notifications, 0 in queue
Route refresh request: received 0, sent 0
Minimum time between advertisement runs is 5 seconds
For address family: IPv4 Unicast
BGP table version 5, neighbor version 5
Index 2, Offset 0, Mask 0x4
Community attribute sent to this neighbor (both)
Outbound path policy configured
Outgoing update AS path filter list is *2
3 accepted prefixes
0 announced prefixes
Connections established 1; dropped 0
Local host: 100::240, Local port: 57666
Foreign host: 100::100, Foreign port: 179
Nexthop: 192.168.100.240
Nexthop global: 100::240
Nexthop local: fe80::ae44:f2ff:fea2:8b52
BGP connection: shared network