-- $Id: yamaha-rt-hardware.mib.txt,v 1.22 2022/02/07 07:29:57 osakabe Exp $ YAMAHA-RT-HARDWARE DEFINITIONS ::= BEGIN IMPORTS mgmt, NetworkAddress, IpAddress, Counter, Gauge, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215 yamahaRTHardware FROM YAMAHA-RT; -- hardware information yrhCpuType OBJECT-TYPE SYNTAX INTEGER { i386(1), i486(2), pentium(3), sh3(4), msp2000(5), ixp1200(6), ad6846(7), msp2100(8), powerQuick3(9), ixp422(10), cn5010(12), c1000(13), qorIQP2(14), qorIQP1(15), a38x(16), vCPU(17), a7040(18) } ACCESS read-only STATUS mandatory DESCRIPTION "The CPU type." ::= { yamahaRTHardware 1 } yrhMemorySize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of main memory in bytes." ::= { yamahaRTHardware 2 } yrhFlashROMSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of the internal Flash ROM in bytes." ::= { yamahaRTHardware 3 } yrhMemoryUtil OBJECT-TYPE SYNTAX Gauge (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "The utilization in percentage of main memory." ::= { yamahaRTHardware 4 } yrhCpuUtil5sec OBJECT-TYPE SYNTAX Gauge (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "The average utilization of CPU in 5 seconds." ::= { yamahaRTHardware 5 } yrhCpuUtil1min OBJECT-TYPE SYNTAX Gauge (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "The average utilization of CPU in 1 minutes." ::= { yamahaRTHardware 6 } yrhCpuUtil5min OBJECT-TYPE SYNTAX Gauge (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "The average utilization of CPU in 5 minutes." ::= { yamahaRTHardware 7 } yrhMemoryUtilTrapThreshold OBJECT-TYPE SYNTAX Gauge (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "If the value of the variable yrhMemoryUtil is over this variable, the system will produce yrhMemoryUtilTrap. If this value is set as 0, the system will never send yrhMemoryUtilTrap." ::= { yamahaRTHardware 8 } yrhCpuUtil5secTrapThreshold OBJECT-TYPE SYNTAX Gauge (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "If the value of the variable cpuUtil5sec is over this variable, the system will produce cpuUtilTrap. If this value is set as 0, the system will never send cpuUtilTrap." ::= { yamahaRTHardware 9 } yrhCpuUtil1minTrapThreshold OBJECT-TYPE SYNTAX Gauge (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "If the value of the variable cpuUtil1min is over this variable, the system will produce cpuUtilTrap. If this value is set as 0, the system will never send cpuUtilTrap." ::= { yamahaRTHardware 10 } yrhCpuUtil5minTrapThreshold OBJECT-TYPE SYNTAX Gauge (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "If the value of the variable cpuUtil5min is over this variable, the system will produce cpuUtilTrap. If this value is set as 0, the system will never send cpuUtilTrap." ::= { yamahaRTHardware 11 } yrhModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF YrhModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of the main and interface modules" ::= { yamahaRTHardware 12 } yrhPowerModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF YrhPowerModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of the power modules" ::= { yamahaRTHardware 13 } yrhFanModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF YrhFanModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of the fan modules" ::= { yamahaRTHardware 14 } yrhInboxTemperature OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A temperature in the box." ::= { yamahaRTHardware 15 } yrhSystemAlarm OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicate the condition when the ALARM LED is on or off." ::= { yamahaRTHardware 16 } yrhEnableSystemAlarmTrap OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicate the system will send yrhSystemAlarmTrap when the variable yrhSystemTrap is turned to on." ::= { yamahaRTHardware 17 } yrhMultiCpuTable OBJECT-TYPE SYNTAX SEQUENCE OF YrhMultiCpuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of the multi CPU" ::= { yamahaRTHardware 18 } yrhMemorySizeMB OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of main memory in megabytes." ::= { yamahaRTHardware 19 } -- module table yrhModuleEntry OBJECT-TYPE SYNTAX YrhModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An interface module entry." INDEX { yrhModuleIndex } ::= { yrhModuleTable 1 } YrhModuleEntry ::= SEQUENCE { yrhModuleIndex INTEGER, yrhModuleName DisplayString, yrhModuleType INTEGER, yrhModuleExtendSlotNumber INTEGER, yrhModuleSerialNumber DisplayString, yrhModuleVersion DisplayString, yrhModuleRunLed INTEGER } yrhModuleIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each module." ::= { yrhModuleEntry 1 } yrhModuleName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A name of the module." ::= { yrhModuleEntry 2 } yrhModuleType OBJECT-TYPE SYNTAX INTEGER { main(1), extend(2) } ACCESS read-only STATUS mandatory DESCRIPTION "A module type. 'main' means a main module, and 'extend' means an extend module which is installed in a extend slot." ::= { yrhModuleEntry 3 } yrhModuleExtendSlotNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An extend slot number of a module. If a variable yrhModuleType is indicated as 'main', this variable has no mean." ::= { yrhModuleEntry 4 } yrhModuleSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A serial number string of the module." ::= { yrhModuleEntry 5 } yrhModuleVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A version string of the module." ::= { yrhModuleEntry 6 } yrhModuleRunLed OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "RUN LED status of th module." ::= { yrhModuleEntry 7 } -- power module table yrhPowerModuleEntry OBJECT-TYPE SYNTAX YrhPowerModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A power module entry." INDEX { yrhPowerModuleIndex } ::= { yrhPowerModuleTable 1 } YrhPowerModuleEntry ::= SEQUENCE { yrhPowerModuleIndex INTEGER, yrhPowerModuleStatus INTEGER } yrhPowerModuleIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each power module." ::= { yrhPowerModuleEntry 1 } yrhPowerModuleStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), notInstalled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "A status of a power module." ::= { yrhPowerModuleEntry 2 } -- fan module table yrhFanModuleEntry OBJECT-TYPE SYNTAX YrhFanModuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A fan module entry." INDEX { yrhFanModuleIndex } ::= { yrhFanModuleTable 1 } YrhFanModuleEntry ::= SEQUENCE { yrhFanModuleIndex INTEGER, yrhFanModuleStatus INTEGER } yrhFanModuleIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each fan module." ::= { yrhFanModuleEntry 1 } yrhFanModuleStatus OBJECT-TYPE SYNTAX INTEGER { good(1), noGood(2) } ACCESS read-only STATUS mandatory DESCRIPTION "A status of a fan module." ::= { yrhFanModuleEntry 2 } -- multi cpu table yrhMultiCpuEntry OBJECT-TYPE SYNTAX YrhMultiCpuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A multi CPU entry." INDEX { yrhMultiCpuIndex } ::= { yrhMultiCpuTable 1 } YrhMultiCpuEntry ::= SEQUENCE { yrhMultiCpuIndex INTEGER, yrhMultiCpuName DisplayString, yrhMultiCpuUtil5sec Gauge, yrhMultiCpuUtil1min Gauge, yrhMultiCpuUtil5min Gauge, yrhMultiCpuUtil5secTrapThreshold Gauge, yrhMultiCpuUtil1minTrapThreshold Gauge, yrhMultiCpuUtil5minTrapThreshold Gauge } yrhMultiCpuIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value for each CPU." ::= { yrhMultiCpuEntry 1 } yrhMultiCpuName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A name of the CPU." ::= { yrhMultiCpuEntry 2 } yrhMultiCpuUtil5sec OBJECT-TYPE SYNTAX Gauge (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "The average utilization of CPU in 5 seconds." ::= { yrhMultiCpuEntry 3 } yrhMultiCpuUtil1min OBJECT-TYPE SYNTAX Gauge (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "The average utilization of CPU in 1 minutes." ::= { yrhMultiCpuEntry 4 } yrhMultiCpuUtil5min OBJECT-TYPE SYNTAX Gauge (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "The average utilization of CPU in 5 minutes." ::= { yrhMultiCpuEntry 5 } yrhMultiCpuUtil5secTrapThreshold OBJECT-TYPE SYNTAX Gauge (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "If the value of the variable cpuUtil5sec is over this variable, the system will produce cpuUtilTrap. If this value is set as 0, the system will never send cpuUtilTrap." ::= { yrhMultiCpuEntry 6 } yrhMultiCpuUtil1minTrapThreshold OBJECT-TYPE SYNTAX Gauge (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "If the value of the variable cpuUtil1min is over this variable, the system will produce cpuUtilTrap. If this value is set as 0, the system will never send cpuUtilTrap." ::= { yrhMultiCpuEntry 7 } yrhMultiCpuUtil5minTrapThreshold OBJECT-TYPE SYNTAX Gauge (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "If the value of the variable cpuUtil5min is over this variable, the system will produce cpuUtilTrap. If this value is set as 0, the system will never send cpuUtilTrap." ::= { yrhMultiCpuEntry 8 } -- Traps yrhMemoryUtilTrap TRAP-TYPE ENTERPRISE yamahaRTHardware VARIABLES { yrhMemoryUtil } DESCRIPTION "This trap indicates that the value of the variable yrhMemoryUtil is over the value of the variable yrhMemoryUtilTrapThreshold." ::= 1 yrhCpuUtilTrap TRAP-TYPE ENTERPRISE yamahaRTHardware VARIABLES { yrhCpuUtil5sec, yrhCpuUtil1min, yrhCpuUtil5min } DESCRIPTION "This trap indicates that the CPU utilization is over the threshold value." ::= 2 yrhSystemAlarmTrap TRAP-TYPE ENTERPRISE yamahaRTHardware VARIABLES { yrhInboxTemperature } DESCRIPTION "This trap indicates that the system ALARM LED is on. At the option, the variables, yrhPowerModuleStatus and yrhFanModuleStatus for each module, will follow in the variable-bindings field" ::= 3 yrhMultiCpuUtilTrap TRAP-TYPE ENTERPRISE yamahaRTHardware VARIABLES { yrhMultiCpuIndex, yrhMultiCpuName, yrhMultiCpuUtil5sec, yrhMultiCpuUtil1min, yrhMultiCpuUtil5min } DESCRIPTION "This trap indicates that the multi CPU utilization is over the threshold value." ::= 4 yrhCpuThresholdOver TRAP-TYPE ENTERPRISE yamahaRTHardware VARIABLES { yrhCpuUtil5sec } DESCRIPTION "This trap indicates that the CPU utilization was over the threshold value." ::= 5 yrhCpuThresholdUnder TRAP-TYPE ENTERPRISE yamahaRTHardware VARIABLES { yrhCpuUtil5sec } DESCRIPTION "This trap indicates that the CPU utilization was under the threshold value." ::= 6 yrhMemoryThresholdOver TRAP-TYPE ENTERPRISE yamahaRTHardware VARIABLES { yrhMemoryUtil } DESCRIPTION "This trap indicates that the MEMORY utilization was over the threshold value." ::= 7 yrhMemoryThresholdUnder TRAP-TYPE ENTERPRISE yamahaRTHardware VARIABLES { yrhMemoryUtil } DESCRIPTION "This trap indicates that the MEMORY utilization was under the threshold value." ::= 8 yrhMultiCpuThresholdOver TRAP-TYPE ENTERPRISE yamahaRTHardware VARIABLES { yrhMultiCpuUtil5sec } DESCRIPTION "This trap indicates that the multi CPU utilization was over the threshold value." ::= 9 yrhMultiCpuThresholdUnder TRAP-TYPE ENTERPRISE yamahaRTHardware VARIABLES { yrhMultiCpuUtil5sec } DESCRIPTION "This trap indicates that the multi CPU utilization was under the threshold value." ::= 10 END