RTシリーズのLAN-TA機能に関するFAQ
VPNアダプタに割り当てられたIPアドレス
作成日 | 2000/Jul/12 |
最終変更日 | 2022/Dec/28 |
文書サイズ | 16KB |
VPNアダプタに割り当てられたIPアドレスの確認方法は?
[ IPアドレスの確認方法 ]
プロバイダ (03-123-4567) ↓ ↓1B 〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜↓〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜 : : ↓ ISDN網 : : ↓ : : ↓ グローバルアドレスの付与 +-------------+ ISDN同期PPP↓ 133.176.200.163 | RTA52i | ↓ | | [ LAN-TA機能 ] | (LAN-TA機能)| ↓ +------+------+ PPTPトンネル↓ | 192.168.0.1 ↓ 192.168.0.0/24 ------+-------------------------↓--+-------------------------- ↓ |192.168.0.2 +------+------+ |(VPNアダプタ)| | | | ゲーム端末 | +-------------+ Windows98
「PPP Adapter」のIPアドレスに表示されます。
LANのIPアドレスやその他の情報と混同してしまいそう(区別がつかない)な場合は、
VPNアダプタの利用前に「0.0.0.0」になっていて、
VPNアダプタで接続したら「0.0.0.0」以外の値になるもの
(イーサネットアダプタ)がLAN-TA機能を利用している「PPP Adapter」です。
MS-DOSプロンプト(command.com)で、「route print」と実行す
ることにより、Windowsの保持している経路(パケットの送信先のリスト)を
表示することができます。
VPNアダプタの接続前後で「route print」を実行することにより、
付与されたIPアドレスや経路の状態変化を確認することができます。
MS-DOSプロンプト(command.com)で、「netstat -rn」と実行す
ることにより、「route print」と同等のWindowsの保持している経路
(パケットの送信先のリスト)を表示することができます。
VPNアダプタの接続前後で「netstat -rn」を実行することにより、
付与されたIPアドレスや経路の状態変化を確認することができます。
「netstat -rn」では、「route print」の情報に加えて、PPTPトンネルで
利用しているTCP接続の情報も確認することができます。
「netstat -rn」の代りに「netstat -r」と実行すると、IPアドレスをDNSホスト名に変換して表示しますが、 DNS名の解決のためにDNSサーバへ問い合せを行ないます。 また、DNS名の解決に失敗するような場合では、表示が非常に遅くなります。
[ Windows98のwinipcfg.exeによる確認例 ]
C:\> route print Active Routes: Network Address Netmask Gateway Address Interface Metric 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.2 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.0.0 255.255.255.0 192.168.0.2 192.168.0.2 1 192.168.0.2 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.0.255 255.255.255.255 192.168.0.2 192.168.0.2 1 224.0.0.0 224.0.0.0 192.168.0.2 192.168.0.2 1 255.255.255.255 255.255.255.255 192.168.0.2 0.0.0.0 1 |
C:\> route print Active Routes: Network Address Netmask Gateway Address Interface Metric 0.0.0.0 0.0.0.0 133.176.200.163 133.176.200.163 1 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.2 2 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 133.176.0.0 255.255.0.0 133.176.200.163 133.176.200.163 1 133.176.200.163 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.0.0 255.255.255.0 192.168.0.2 192.168.0.2 2 192.168.0.1 255.255.255.255 192.168.0.2 192.168.0.2 1 192.168.0.2 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.0.255 255.255.255.255 192.168.0.2 192.168.0.2 1 224.0.0.0 224.0.0.0 133.176.200.163 133.176.200.163 1 224.0.0.0 224.0.0.0 192.168.0.2 192.168.0.2 1 255.255.255.255 255.255.255.255 133.176.200.163 133.176.200.163 1 |
C:\> route -h Manipulates network routing tables. ROUTE [-f] [command [destination] [MASK netmask] [gateway] [METRIC metric]] -f Clears the routing tables of all gateway entries. If this is used in conjunction with one of the commands, the tables are cleared prior to running the command. command Must be one of four: PRINT Prints a route ADD Adds a route DELETE Deletes a route CHANGE Modifies an existing route destination Specifies the destination host. MASK Specifies that the next parameter is the 'netmask' value. netmask Specifies a subnet mask value to be associated with this route entry. If not specified, it defaults to 255.255.255.255. gateway Specifies gateway. METRIC Specifies that the next paramenter 'metric' is the cost for this destination All symbolic names used for destination are looked up in the network database file NETWORKS. The symbolic names for gateway are looked up in the host name database file HOSTS. If the command is PRINT or DELETE, wildcards may be used for the destination and gateway, or the gateway argument may be omitted. 診断上の注意: (DEST & MASK) != DEST のとき、無効な MASK はエラーを発生します。 例> route ADD 157.0.0.0 MASK 155.0.0.0 157.55.80.1 The route addition failed: 87 例 : > route PRINT > route ADD 157.0.0.0 MASK 255.0.0.0 157.55.80.1 METRIC 3 ^destination ^mask ^gateway ^metric > route PRINT > route DELETE 157.0.0.0 > route PRINT |
[ Windows98のnetstatコマンドによる確認例 ]
C:\> netstat -rn Route Table Active Routes: Network Address Netmask Gateway Address Interface Metric 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.2 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.0.0 255.255.255.0 192.168.0.2 192.168.0.2 1 192.168.0.2 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.0.255 255.255.255.255 192.168.0.2 192.168.0.2 1 224.0.0.0 224.0.0.0 192.168.0.2 192.168.0.2 1 255.255.255.255 255.255.255.255 192.168.0.2 0.0.0.0 1 Active Connections Proto Local Address Foreign Address State |
C:\> netstat -rn Active Routes: Network Address Netmask Gateway Address Interface Metric 0.0.0.0 0.0.0.0 133.176.200.163 133.176.200.163 1 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.2 2 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 133.176.0.0 255.255.0.0 133.176.200.163 133.176.200.163 1 133.176.200.163 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.0.0 255.255.255.0 192.168.0.2 192.168.0.2 2 192.168.0.1 255.255.255.255 192.168.0.2 192.168.0.2 1 192.168.0.2 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.0.255 255.255.255.255 192.168.0.2 192.168.0.2 1 224.0.0.0 224.0.0.0 133.176.200.163 133.176.200.163 1 224.0.0.0 224.0.0.0 192.168.0.2 192.168.0.2 1 255.255.255.255 255.255.255.255 133.176.200.163 133.176.200.163 1 Route Table Active Connections Proto Local Address Foreign Address State TCP 192.168.0.2:1034 192.168.0.1:1723 ESTABLISHED |
C:\> netstat -h Displays protocol statistics and current TCP/IP network connections. NETSTAT [-a] [-e] [-n] [-s] [-p proto] [-r] [interval] -a Displays all connections and listening ports. -e Displays Ethernet statistics. This may be combined with the -s option. -n Displays addresses and port numbers in numerical form. -p proto Shows connections for the protocol specified by proto; proto may be TCP or UDP. If used with the -s option to display per-protocol statistics, proto may be TCP, UDP, or IP. -r Displays the routing table. -s Displays per-protocol statistics. By default, statistics are shown for TCP, UDP and IP; the -p option may be used to specify a subset of the default. interval Redisplays selected statistics, pausing interval seconds between each display. Press CTRL+C to stop redisplaying statistics. If omitted, netstat will print the current configuration information once. |
[ 関連情報 ]
[ FAQ for RT-Series ]
[ FAQ for LAN-TA機能 / files / TA機能(シリアルポート) / NAT / ネットワーク・ゲーム / TA機能(USBポート) / ブロードバンドTA機能 ]